US Stock 75L Portable Acrylic Polishing Machine HHO Flame Generator 110V 300W

Description

Description
US Stock- Ving 300W 75L Portable Acrylic Polishing Machine HHO Flame Generator
Stock in California, 24 Months Warranty, Quality Guarantee!
Shipping Out Within
24 Hours,
Fast Door to Door Delivery!
Professional Team,
24h
Technical Support by Email or Calling!
Description:
• Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.
• The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright.
This machine has two colors, blue and white.Color will be shipped at random.
• Take water (Distilled water and pure water) as fuel;
• "low working voltage, cut off automatically beyond the set voltage" design;
• Improved model from APM-H60;
• Its electrolysis adopts series and parallel compound technique.
• Economical, environmental protection, fuel obtained easily;
• The design makes the machine safer and save more energy;
• The New Model No. is APM-H160, and its maximum output gas is up to 75l / h;
• The electrolysis is more efficient.
• Heat treatment for metal parts.
• Weld the hinge of spectacles rim.
• Seal the injection glass bottle, conforming to GMP industrial standards.
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse LED chip and thermocouple.
• Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
• Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.
• Strong and durable, light weight and portable.
• Save a lot of money and time for you.
• Economical and practical.
• Energy saving, environmental friendly, safe and reliable
• The edge polished by this machine is more smooth and shiny.
Specifications:
Model
APM-H160-US
Input Voltage
AC110 - 220V
Maximum Output Gas
75L / H
Operation Gas Pressure
0.08-0.13Mpa
Ambient Temperature
-10°C ∼ 40°C
Flame Temperature
≥2800°C
Water Consumption (L / H)
0.015 L / H
Flame Gun No.
Single
Elecrtolyzer Capacity
1.6L
The flam
e acrylic polishing machine’s ins
truction:
Flame gun instruction:
1.
Adjusting valve;
2.
Connector;
3.
Flame nozzle;
4.
Bend flame nozzle (option);
5.
Flame gun bar;
6.
Air inlet port;
7.
Pin type flame nozzle (option).
Add water timely
After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water.
How to add water?
1. Turn off the torch.
2. Switch off the power and open the valve on the torch to let out the remaining gas.
3. Screw off the top cover.
4. Add water close to the “high” line.
5. Screw on the cover and switch on the machine, and it can work again.
Attention:
KOH or NaOH is dangerous, please do not eat them.
The temperature is up to 2800℃ when burning, please put the fla
me Polishing Machine in
the safe place.
Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock.
Warning:
When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut
off power supply imme
diately.
Do not repair it by yourself, you should contact us.
The above cover; please do not load metal pieces.
Please connect the ground wire.
Forbid ignite while no air pressure
• Synthetic Glass Industry.
The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article.
• Electronic Industry. IC encapsulation.
• Semiconductor.
• Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload.
1.
It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect.
2.
Lead and tin pole fusion accumulator.
3.
Engineering precision.
• School laboratory.）
Provides a convenient and safe oxy-hydrogen flame.
Quality Report:
Packing Information：
Wooden Box:
There is total one carton box.
Machine Dimension
320mm x 220mm x 310mm (12.6" x 8.7" x 12")
Machine Weight
6kg
Package
Carton box with foam fixed
Packing Size
450mm x 280mm x 370mm (18" x 11" x 14.6")
Gross Weight
9.32kg
Packing List
Machine
1 set
Flame Gun
1 pc
Plastic funnel
1 pc
Flame Spray Nozzle
1 pc
Rubber Tube
1 pc
Power cable
1 pc
Electrolyte Powder
0 / 1 bottle
Instruction
1 pc
P. S.: Electrolyte powder (NaOH or KOH) is forbidden by express company, so we could not put it into the package. You can buy it from local chemicals paint.
You should buy some powder, one bottle is 500g, and it can be used about 3 - 4 months.
NaOH
KOH
Package:
Warranty:
Spare Parts Supports
We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF format on how to replace the parts to you.
Satisfaction Guarantee
We provide 24 months warranty after delivery.
All the extra parts for equipment can be purchased from us.
We offer 14 days 100% satisfaction guarantee on all our machines. If you are not satisfied after receiving an item, we promises that, within 14 days after actual delivery of such an item, you are allowed to return the item to us and get complete refund, provided the returned item does not affect its subsequent re - selling and you also undertake the charge of returning delivery.